Does your 84-89 Cluster have the Cruise Option?

Posted by Bryan Thompson on

I get this question quite a bit - Does My 84-89 Cluster have Cruise Control?  Here's how to tell:

1)  Remove the five screws holding on the back.  They're 7/32".

2)  Remove the back.

3)  Look at the space to the left of the power supply.  The power supply is the small board mounted to the top board in the upper right corner, near the 12 pin connector that connects the top and bottom boards.  If the components in this area are populated, your cluster has the cruise option.  If not, your cluster does not support cruise.

Below are photos of this area:



The above Cluster Does have the cruise option

 



The above cluster does NOT have the cruise option!

 

Thank you,

Bryan Thompson

batee.com Corvette Parts and Repair


Share this post



← Older Post Newer Post →


Leave a comment

Please note, comments must be approved before they are published.